Industrial Control (B2B)

MOLLOM VFD 1.5kW (2HP) — Single-Phase to Three-Phase 220V

220V 1P→3P2HPCNC

4.1 · 31 reviews

Compare this product

Single-phase input to 220V three-phase output — the typical choice for workshops without a three-phase feed that want to run a 3-phase motor. This is an entry-level model (2HP/1.5kW), meant for spindles and small CNC motors, not large industrial loads. The output range up to 3000Hz is only useful if your specific spindle takes advantage of it — for a standard 60Hz motor it's irrelevant.

$89.99reference price

VFD 4kW (5HP) Vector Control — 220V 1-Phase/3-Phase

Vector control5HP1P/3P

4.3 · 24 reviews

Compare this product

Has vector control (not just scalar V/F), which holds torque better at low RPM — important if you'll be threading or cutting at reduced speed. At 5HP/4kW it covers larger motors than the entry-level model, and accepts both single-phase and three-phase input, giving flexibility depending on the electrical setup available. Rated up to 26A — confirm your wiring and breakers can handle that current before installing.

$174.99reference price

Waveshare Industrial USB to RS485 Converter (2 units)

USBFT232RL2 units

4.6 · 77 reviews

Compare this product

Unlike the RS232/485/422-to-Ethernet gateway already in this ranking, this is a simple USB-to-RS485 converter — it plugs directly into a PC/laptop's USB port to configure, program, or monitor an RS485 bus from a computer, not to bridge to an Ethernet network. Uses the FT232RL chipset (a recognized one, not a generic clone) plus an SP485EEN transceiver, with real overvoltage (TVS) and ESD protection — something cheaper options of this type often skip. Comes as 2 units, useful if you need one for the shop and one as a spare.

$25.99reference price

LCLCTC DIN Rail Power Supply 5V DC 15W 2.4A

DIN rail5V DC15W

4.6 · 43 reviews

Compare this product

Compact DIN-rail supply meant to power low-consumption electronics (Arduino, PLC, relays) at 5V DC inside a panel or enclosure. Has overload, overvoltage, and short-circuit protection, an open-frame housing (good heat dissipation, but less sealed against dust than an enclosed housing), and a trimmer to adjust output between 4.75-5.5V. Note: several reviews report the real current is closer to 3A than the 2.4A stated in the title — the product listing is inconsistent on that spec, so don't push it to the limit if you need exactly 2.4A.

$13.40reference price

VAMRONE Slotted Aluminum DIN Rail 8" (30 pieces)

TS35Aluminum30 pieces

4.7 · 77 reviews

Compare this product

This is 30 short 8-inch sections, not one continuous long rail — you'll need to join several sections if the panel is wide, and a visible seam between sections can result. Aluminum profile 35mm wide by 7.5mm tall (the low-profile TS35 standard), slotted, with end caps included. Aluminum is lighter and doesn't rust like steel, but flexes more over long unsupported spans — for installations with several heavy components hanging off it, a steel rail gives more rigidity.

$18.99reference price

Meowlian DIN Rail Terminal Block 100pcs UK-2.5B

DIN railPA66 nylon100 pcs

4.6 · 42 reviews

Compare this product

The title advertises 20A/600V but the listing's own technical sheet says 32A/UL 800V — a typical inconsistency for this kind of product, don't rely on the title alone. The body is PA66 nylon with pure copper for good contact, and the self-locking cage system doesn't stress the plastic when the screw is tightened (unlike a traditional terminal). Note: per detailed reviews, they don't come with end stops or rail sections included — you'll need to buy those separately.

$19.99reference price

REFLYING Open Cable Raceway 8 Sections (White)

Cable raceway8 sections

4.6 · 356 reviews

Compare this product

Originally designed to hide TV/computer cables on a desk, it's not a certified duct for an industrial panel — but several reviews use it anyway to tidy wiring inside an electronics enclosure, and it works fine for that at low cost. It's thin plastic (one review calls it "cheap quality" though it does the job), installs with double-sided tape or screws, and doesn't replace a rigid slotted duct if you need something structural or weatherproof.

$22.99reference price

BNTECHGO Silicone Wire 18AWG Red (500ft Spool)

18AWGSilicone-60° to 200°C

4.8 · 340 reviews

Compare this product

Generic tinned-copper wire with silicone insulation (rated -60°C to 200°C, 600V nominal) — not automation-specific, but it's the typical choice for flexible internal wiring in DIY projects (supplies, sensors, small motors) where standard PVC turns stiff with heat. Comes in a single color (red) on a 500ft spool — you'll need to buy black separately for the return/negative, and at this price per foot it's only worth it if you need silicone's extra flexibility.

$84.98reference price

#10

BNTECHGO Silicone Wire 22AWG Red (1000ft Spool)

22AWGSilicone60 strands

4.8 · 200 reviews

Compare this product

Same family as the 18AWG silicone wire in this ranking, in a thinner gauge (22AWG, 60 tinned strands) for signal or small loads, not power. Rated -60°C to 200°C and 600V nominal, ideal for internal wiring of projects that run hot (supplies, drivers). Also comes only in red — you need black separately — and at a 1000ft spool it's a large purchase, not meant for a small one-off project.

$92.98reference price

#11

DIHOOL GFCI Breaker with Surge Protection, DIN Rail 20A

GFCI 30mADIN rail20kA

4.6 · 316 reviews

Compare this product

Combines a breaker + ground fault protection (30mA Class A) + surge protection (20kA) in a single DIN-rail module — fairly complete for 120/240V. Note: several reviews (including one that ended in a fire) report the wiring instructions are confusing for 208V/240V without a neutral, so double-check the diagram before energizing it. Comes with 1 DIN rail and 5 crimp terminals included, but the protection rating is IP20 (not sealed, only for an enclosed panel).

$23.99reference price

#12

WUYELIN Control Transformer 24V 40VA for HVAC

24V 40VAHVAC

4.5 · 502 reviews

Compare this product

A classic isolation transformer for HVAC control circuits (thermostats, relays, gas valves) — not DIN-rail mounted, it's foot-mounted with screws. Several reviews of this type of transformer report that wiring instructions for 208V/240V without a neutral are confusing and led to burnout; for 120V with a neutral most report no issues, but it's worth checking the diagram carefully if powering it at another voltage.

$18.68reference price

#13

ATO Three-Phase Soft Starter 15HP (11kW) 240V 45A

15HP/11kW240VNo reviews

No reviews yet

Compare this product

A real soft starter (not a VFD) for large three-phase motors — reduces inrush current in compressors, pumps, or 15HP spindles. The manufacturer itself notes it requires a separate bypass contactor (not included), and the manual isn't guaranteed to be in Spanish. Still has no reviews on Amazon (0 ratings) — a good technical option on price versus other similar starters, but it's a purchase with no feedback from other buyers yet.

$426.93reference price

#14

waveshare 4-Ch RS485 to Ethernet RJ45 Serial Server

4x independent RS485Ethernet/RJ45Modbus/MQTT gateway

4.7 · 15 reviews

Compare this product

Unlike the RS232/485/422-to-Ethernet gateway in this ranking (single port, with PoE), this device handles 4 independent RS485 buses at once from a single Ethernet connection — but it doesn't include PoE, you need separate power. Combines serial server, Modbus gateway, MQTT gateway, and RS485-to-JSON functions in one device, with screw terminals and a wall- or DIN-rail-mount housing. Still has few reviews (15) for a device at this price.

$64.99reference price

#15

waveshare Modbus RTU Relay Module 32 Channels (RS485, Industrial)

32 channelsRS485 Modbus RTUOptical isolation

5.0 · 5 reviews

Compare this product

32 relay channels controlled over Modbus RTU via RS485, with a configurable address (1-255) to cascade several modules on the same bus. Has real optical isolation between the logic and the switched load, plus TVS protection and a resettable fuse against overvoltage — not an unprotected generic relay module. Relay contacts rated up to 10A 250VAC/30VDC. With only 5 reviews so far, it's a solid technical purchase on paper but without much history from other buyers.

$84.99reference price

#16

Modbus RTU Relay Module 16 Channels (RS485, Industrial)

16 channelsRS485 Modbus RTUOptical isolation

No reviews yet

Compare this product

Same family and same protections (optical isolation, TVS, resettable fuse, relay rated up to 10A 250VAC/30VDC) as the 32-channel module in this ranking, but with half the outputs — for medium installations where 32 channels would be overkill and overpriced. No reviews yet on Amazon, so there's no real feedback from buyers beyond the spec sheet.

$63.35reference price

#18

BNTECHGO Silicone Wire 14AWG Red + Black (100ft each)

14AWGRed+black included400 strands

4.8 · 162 reviews

Compare this product

Same type of silicone wire as the 18AWG and 22AWG in this ranking (silicone insulation, resists -60°C to 200°C, 600V), but in a thicker gauge (14AWG, 400 tinned strands) that handles more current — and unlike those other two, this one comes in red AND black (100ft each), so you don't need to buy black separately. With 162 reviews and a 4.8 rating, it has far more track record than the rest of this batch.

$78.98reference price

#19

BNTECHGO Silicone Wire 18AWG White (50ft Spool)

18AWGWhiteSingle color

4.5 · 151 reviews

Compare this product

Same BNTECHGO silicone wire family already in this ranking, same gauge as the red version (18AWG, 150 tinned strands, -60°C to 200°C, 600V), but in white — useful as a third conductor (signal, neutral, or identification) when red and black are already used as positive/negative. Comes in a single color, 50ft spool.

$13.98reference price

#20

BAOMAIN AC Contactor 20A 2-Pole, 110V Coil (DIN Rail)

20A110V AC coil166 reviews

4.5 · 166 reviews

Compare this product

Same manufacturer and family as the 16A BAOMAIN contactor in this ranking — since that 16A listing was discontinued on Amazon (verified 2026-10-08), this 20A one became the smallest available option in the family. With 166 reviews and a 4.5 rating, it has far more real buyer track record than the rest of this batch. Like the rest of the family, it's AC only (not DC) and needs separate short-circuit protection (a fuse or breaker), which isn't included.

$9.99reference price

#21

🏆 Best seller

QILIPSU IP67 Junction Box 20x16.1x7.9" with Mounting Plate

IP67DIN railLarge enclosure

4.7 · 2,367 reviews

Compare this product

Large enclosure (20x16.1x7.9") IP67 rated with an internal mounting plate, metal inner door, and hinged lid — meant to house a complete control panel (relays, breakers, a router) protected from water and dust, not just a pass-through junction box. Has no pre-drilled knockouts: you drill your own holes for cable glands, which several reviews call an advantage (they land exactly where you need them) rather than a limitation. The ABS plastic is sturdy but not metal — for installations with more weight hanging inside, reinforcing the mount is worth considering.

$134.99reference price

#22

BNTECHGO Silicone Wire 12AWG Red+Black (50ft each)

Silicone12AWGRed/Black

4.9 · 14 reviews

Compare this product

Same silicone wire brand already present in several gauges in this ranking, here in 12AWG (680 strands) for higher-current loads — small motors, batteries, a panel's power feed cables. Unlike the other gauges that only come in red, this one already includes black (50ft of each), so you don't need to buy the return separately. With only 14 reviews it's still a small data point compared to other products from the same brand in the catalog.

$64.98reference price

#23

Dinkle DSS2.5N-10P 10-Pole DIN Rail Jumper Bridge (10pcs)

DIN railDinkle10-pole

4.5 · 90 reviews

Compare this product

Note the name: this is NOT a terminal block, it's the 10-pole jumper (bridge) that connects several DK2.5N blocks together — you need the base Dinkle DK2.5N blocks (sold separately) for this to be of any use. It can be cut down to smaller sizes if you don't need all 10 poles. One review notes it snaps in loosely and can come out if not seated firmly — check that it clicks firmly into place when installing.

$29.99reference price

#24

Dinkle SS2 DIN Rail End Stop (25pcs)

DIN railDinkleEnd stop

4.8 · 170 reviews

Compare this product

This is the end stop missing from several terminal blocks in this ranking — without it, blocks can slide along the 35mm DIN rail. It screws into the rail for extra holding strength instead of just snap-fitting, which makes it sturdier than purely plastic snap-in versions. It's a complementary accessory, it doesn't replace the terminal block itself — buy it along with the blocks if their listing doesn't already include them.

$16.99reference price

#25

Inkbird PID Temperature Controller Kit — with 40A SSR Relay and K-Type Thermocouple

PID40A SSRK-type thermocouple

4.5 · 605 reviews

Compare this product

This is a standalone PID temperature controller — it has NO RS485/Modbus communication like the gateways and relay modules in this ranking, it's a local device programmed and read directly on its own screen. Comes with the 40A solid-state relay (SSR) and K-type thermocouple included, plus a separate alarm output (250V, 3A) to wire a buzzer. Accepts 100-240V AC. A version of the same family with an RS485 Modbus output exists, but it has far fewer reviews on Amazon backing it.

$42.99reference price

#26

PUSR DR302 — Modbus RTU to Modbus TCP Gateway, DIN Rail

Modbus RTU/TCPRS485DIN rail

4.5 · 44 reviews

Compare this product

Converts Modbus RTU (over RS485) to Modbus TCP over Ethernet, DIN-rail mounted — it's an alternative from another brand (PUSR) to the Waveshare gateways in this ranking, and cheaper. Supports TCP server/client mode, UDP server/client, and virtual COM. Has considerably fewer reviews than the catalog's most popular products (44), though it's an "Amazon's Choice" in its category — this niche of Modbus gateways on Amazon generally has fewer reviews compared to mass-consumer products.

$39.00reference price

#28

Waveshare Modbus RTU Relay Module 8 Channels (RS485, Industrial)

8 channelsRS485 Modbus RTUOptical isolation

4.8 · 28 reviews

Compare this product

Same family as the 16- and 32-channel modules in this ranking (optical, magnetic and TVS isolation, relay rated up to 10A 250VAC/30VDC), but the smallest version of the line — for small installations where neither 16 nor 32 channels make sense. It is the only one of the three with real reviews on Amazon (4.8 stars, 28 reviews). The listing does not state the module's supply voltage range (other Waveshare modules in this family use DC 7-36V) — worth confirming with the seller before buying if your installation has a fixed power source.

$41.99reference price

#29

Tzone Modbus RTU RS485 Temperature & Humidity Sensor

RS485Modbus RTUIP54

5.0 · 9 reviews

Compare this product

An industrial temperature and humidity sensor with RS485/Modbus RTU output, SHT30 chip, IP54 housing for outdoor/greenhouse use, and an LCD display. It reads with the same Modbus-Read nodes in Node-RED as a pressure sensor, so it's a way to expand this catalog's hydroponics monitoring guide with a second type of data (ambient temperature and humidity) without switching protocols. It still has few reviews (9), though it's a real brand with its own store, sold and shipped by Amazon.

$43.99reference price

#30

Chtaixi 32A DIN Rail Thermal-Magnetic Circuit Breaker (2-Pole, 120V/240V)

DIN railThermal-magneticCurve C

4.8 · 607 reviews

Compare this product

A simple thermal-magnetic DIN-rail breaker — this catalog's certification guide explicitly notes that several contactors (like the BAOMAIN ones in this ranking) don't include built-in short-circuit protection and that you "need to add a fuse or breaker yourself," without a simple breaker listed until now (the DIHOOL in this catalog is a GFCI for 120V with neutral, a different use case). Amazon's Choice, 4.8 stars, 607 reviews, 600+ bought in the past month. Available in several amperages (6A to 63A) at the same price — pick the one that matches your actual load, not whichever comes up first.

$12.87reference price

#31

Waveshare 30-Channel Ethernet Relay Module — Modbus TCP/RTU, PoE

EthernetModbus TCPPoEWaveshare

4.2 · 20 reviews

Compare this product

Unlike this catalog's Modbus RTU relay modules (16- and 32-channel, both over RS485), this Waveshare is controlled over Ethernet with Modbus TCP — it plugs directly into the building's network without needing a dedicated RS485 master, and it also supports PoE power (a single network cable both powers and communicates with the module). Amazon's 'Overall Pick'. Real limitation: only 20 reviews — much less market track record than this catalog's existing RS485 modules, worth weighing if a widely proven product matters to you.

$98.99reference price

#32

Electrodepot 60A 4-Pole NO AC Contactor — 110-120V Coil, DIN Rail

60A AC-1 / 40A AC-3Normally Open4-PoleDIN Rail

4.5 · 39 reviews

Compare this product

A normally open (NO) 4-pole DIN-rail contactor — 40A under AC-3 duty (motor starting) and 60A under AC-1 duty (resistive/steady-state current). It fills the gap this catalog's VFD/soft-starter install guide explicitly flags: several 15HP soft starters (including the ATO one in this ranking) don't include the bypass contactor that closes only after the starter has already ramped the motor up to full speed. That's exactly where the honest caveat lives: this isn't a contactor for directly starting a 15HP motor (for that, 40A AC-3 falls short of the ~45A nominal current) — it's specifically for the bypass function, where it closes with no starting load and then just carries steady-state current, which is where the 60A AC-1 rating comfortably covers it. 4 poles instead of 3 (the fourth is left unused or free for another signal). 110-120V coil, same as the BAOMAIN contactors already listed in this catalog. Sold and shipped by Amazon, 4.5 stars with 39 reviews.

$66.89reference price

#33

ASI ASISP180-1P — Modular Surge Protector 1-Pole 120V, DIN Rail

Surge Protection1-Pole / 120VDIN RailRemote Alarm

5.0 · 2 reviews

Compare this product

Modular DIN-rail surge protection device (SPD) — 1 pole, 120 Vac, with a pluggable MOV module that swaps out without disconnecting the base wiring. UL1449 4th Edition Type 4 listed (for use within Type 1, 2, and 3 installations), rated for 180 Vac max continuous operating voltage and a factory-tested 200 kA SCCR — more robust than the GFCI breaker with combined surge protection already listed in this catalog, where surge protection is a secondary function of a module built mainly for ground-fault protection. Unlike that breaker, this SPD doesn't require a neutral in the circuit and adds a remote alarm contact for status monitoring without opening the panel. It's only 1 pole at 120 Vac — three-phase or 240V circuits need a different model in the same ASI line — and with only 2 Amazon reviews it still has a thin real-world track record despite the 5.0 rating.

$43.68reference price

#34

BAOMAIN Red Sign E-Stop — IP65 Emergency Stop Button with Weatherproof Box, 1NO+1NC

Emergency StopIP651NO+1NC660V/10A

4.4 · 422 reviews

Compare this product

A mushroom-head emergency stop button mounted in a yellow-and-black IP65 box with a sealing gasket — unlike the contactors and breakers in this ranking that sit on DIN rail, this piece bolts on separately, in a visible spot near the operator, not inside the closed panel. 1NO+1NC contacts rated 660V/10A: it doesn't cut motor current directly, it cuts the coil of the contactor or starter that does, so it wires in series with the control circuit. With 422 reviews and a 4.4★ rating, it has one of the strongest track records in this catalog, right alongside the Electrodepot contactor and the DIHOOL breaker. Real limitation: this specific listing doesn't call out explicit UL/CSA certification (unlike some other BAOMAIN products in this catalog) — confirm with the seller if your installation formally requires it.

$9.99reference price

#35

Dinkle DK4N DIN Rail Terminal Block 100pcs — Screw Type, 30A/600V UL

DIN RailScrew Type30A/600V UL100 pcs

4.6 · 78 reviews

Compare this product

Screw-type DIN rail terminal block, UL 600V/30A, accepts 10 to 22 AWG wire — handles noticeably heavier gauge than the Meowlian block already in this catalog, whose own listing is inconsistent between the title (20A) and the spec sheet (32A). It's a traditional screw clamp, not the Meowlian's cage-clamp: you tighten it with a flat screwdriver and need to watch torque, it doesn't push-fit the wire. Amazon's Choice, International Connector/Dinkle brand — the same line as the end stop and rail jumper already listed in this catalog, so those accessories (SS2 end stops, DSS2.5N jumpers) are cross-compatible. Doesn't include end stops or rail, same as the rest of the blocks in this catalog.

$59.99reference price

#36

Chtaixi 20A Thermal-Magnetic DIN Rail Breaker (1-Pole, 120V/240V)

DIN Rail1-PoleCurve C6-63A

4.6 · 281 reviews

Compare this product

1-pole thermal-magnetic DIN rail breaker, Curve C (trips at 5-10x rated current), silver alloy contacts, 35mm rail mount — the single-pole version of the 2-pole Chtaixi already listed in this catalog. The difference matters: 1-pole interrupts a single live conductor (for single-leg 120V circuits, like a contactor coil or a small control circuit); the 2-pole version interrupts both lines at once (for 120V/240V loads that require disconnecting both conductors). It's a separate Amazon listing, not a variant within the same listing as the 2-pole one — though this particular listing does offer amperage variants (6A to 63A) at the same price ($7.99), so confirm you picked the right amperage for your actual load before buying.

$7.99reference price

#37

APIELE 22mm 3-Position Selector Switch (Pack of 2) — Maintained, ON-OFF-ON, 2NO

22mm Panel MountMaintainedON-OFF-ON660V/10A

4.6 · 146 reviews

Compare this product

Panel-mount rotary selector switch, 22mm, maintained (latching, no spring return) — ON-OFF-ON with 2 normally-open (2NO) contacts, 660VAC/10A. Nylon body, aluminum head, silver contacts, brass conductor. Sold as a pack of 2. It's the typical part for choosing an operating mode (Manual/Off/Auto) on a control panel's door — unlike the contactors and relays in this catalog that mount on DIN rail inside the enclosure, this one bolts directly into a 22mm hole in the front panel. Watch out: being ON-OFF-ON with 2NO, each extreme position closes a different contact and the middle position closes neither — the wiring logic (which mode goes on which side) depends entirely on how you wire it, it isn't predefined by the manufacturer.

$14.99reference price

#38

mxuteuk 22mm Mushroom E-Stop Push Button — 2NC, 660V/10A

22mm Panel MountMushroom Head2NC660V/10A

4.3 · 87 reviews

Compare this product

Panel-mount mushroom-head emergency stop button, 22mm, push-twist type (locks when pressed, releases by twisting) — 2 normally-closed (2NC) contacts, 660VAC/10A, brass body, 40mm mushroom head. Unlike the BAOMAIN one in this catalog — which comes in a surface-mount IP65 weatherproof station box, bolted separately from the panel —, this one goes directly into a 22mm hole in the enclosure's door or front panel, for setups that already have their own control interface instead of a standalone stop station. Like the BAOMAIN, it doesn't cut motor power directly: it wires in series with the contactor's or starter's coil. At 4.3 stars and 87 reviews it has a thinner track record than the BAOMAIN in this catalog (422 reviews) — confirm certification with the seller if your installation formally requires it, since this listing doesn't call it out explicitly either.

$9.99reference price

#39

BAOMAIN 450-Piece Ferrule Wire Connector Kit — AWG 22-14, 5 Sizes

FerruleAWG 22-14Tinned Copper450-Piece

4.3 · 41 reviews

Compare this product

450-piece kit of ferrule terminals (also called wire end sleeves) for stranded wire — think of a ferrule as a small metal thimble that slides onto the end of a flexible/stranded cable before it goes into a screw terminal or terminal block, so the individual strands don't splay out or work loose under pressure. It includes 5 sizes (AWG 22/20/18/16/14) color-coded for quick identification, tinned copper (more corrosion-resistant than bare copper) and a flared insulation collar that keeps strands from escaping sideways. It's the missing companion piece in this catalog: screw-type terminal blocks like the Dinkle DK4N already listed accept bare stranded wire, but the connection stays tighter and more vibration-resistant with a ferrule crimped on first — the Dinkle itself accepts down to 22 AWG, right at this kit's finest gauge. Heads up: it doesn't include a crimping tool — you need a dedicated ferrule crimper (not a regular wire stripper) to get an even compression; hand-crimping with regular pliers doesn't guarantee correct contact or grip.

$7.49reference price

#40

QCG 1" NPT Stainless Steel Cable Gland — IP68, for 18-25mm Cables

Cable GlandIP68Stainless Steel1" NPT

4.1 · 21 reviews

Compare this product

Stainless steel cable gland, 1" NPT thread, adjustable for cables 18 to 25mm in diameter, with a rubber gasket and IP68 rating. Think of it as an adjustable fist: it screws into a hole in an enclosure, the cable passes through the middle, and tightening the nut compresses the rubber gasket against both the cable and the edge of the hole at the same time, sealing the opening without crushing the internal conductors. It covers a real gap in this catalog: the large QILIPSU IP67 enclosure (also in this ranking) doesn't come with pre-drilled knockouts — you have to drill each hole a cable enters through and seal it separately, and this gland is exactly the missing piece for that. It's stainless steel, not nylon, so it holds up better against corrosion and heat/cold cycling outdoors. Heads up: it ships as a single unit, not a kit — if your enclosure needs several cable entries (power, signal, output), you'll need to buy more than one.

$15.69reference price

#41

Nannday 3-Phase Voltage Monitor Relay — Phase Failure & Sequence Protection

Phase Failure3-Phase200-500VACDIN Rail

4.1 · 399 reviews

Compare this product

A three-phase voltage monitoring relay that wires ahead of a soft starter, VFD or contactor and trips the control circuit (not the motor's power lines) when it detects a lost phase, reversed phase sequence, or voltage imbalance between the three lines — the three most common reasons a three-phase motor burns out from running forced on a single phase. Rated 200-500VAC 50/60Hz (covers both 240V and 480V systems), mounts on 35mm DIN rail or bolts down loose, with 2 sets of NO/NC contacts rated 6A at 250V — control-circuit level, not power level, wired in series with the contactor coil just like this catalog's BAOMAIN E-stop button. Important limitation straight from the manufacturer's own listing, included here without editing it down: it's meant to be installed on the incoming supply side (the three-phase feed reaching the panel), NOT on a variable-frequency drive's output — a VFD's output isn't a clean sine wave and the relay can false-trip there. 399 reviews, 4.1 stars.

$20.11reference price

#42

BAOMAIN DIN Rail Fuse Holder Base 1-Pole 32A 690V — 5-Pack, with Blown-Fuse LED Indicator

Fuse HolderDIN Rail32A 690VACLED Indicator

4.5 · 82 reviews

Compare this product

A DIN rail fuse holder base (35mm rail, 1 module wide at 17.5mm) that houses a replaceable 10x38mm cylindrical fuse cartridge — single pole, rated up to 32A and 690VAC, with a 50kA breaking capacity and 3W of dissipated power. It has a built-in red LED that lights up the moment the fuse blows, so you can spot the failed module without pulling apart every base to check it. Screw terminals rated to a specified 2.5Nm torque, flame-retardant ABS housing, copper contacts, and cURus (UL) plus CE certification. The listing itself explicitly warns 'Do not open under load' (never open the cover while the circuit is energized). Sold in a 5-pack — these are just the bases, fuse cartridges are NOT included and need to be bought separately, matched to the real load's amperage and curve (gG for general use, aM for motor starting). 82 reviews, 4.5 stars.

$15.99reference price

#43

MEAN WELL EDR-120-24 — DIN Rail Power Supply 24V DC 5A 120W

24V DC Power SupplyDIN Rail120W / 5AActive PFC

4.8 · 471 reviews

Compare this product

A switching power supply for 35mm DIN rail that converts 90-264VAC input — any wall voltage worldwide, no manual selector needed — into a clean, regulated 24V DC output, up to 5A / 120W continuous. It has active PFC (power factor correction), protection against short circuit, over-voltage, overload and over-temperature, and cools by free air convection, no fan. Screw-terminal output, -20°C to 60°C operating temperature range, UL/cUL/TUV/CB/CE certifications, 87.5% efficiency, and a 2-year manufacturer warranty. Mean Well is one of the most established brands in industrial switching power supplies — their DIN rail PSUs are the de facto standard in automation panels worldwide. It measures 4.5 x 1.6 x 4.9 inches and mounts with its built-in clip, just like the rest of this catalog's DIN rail parts. 471 reviews, 4.8 stars.

$30.99reference price

#44

⭐ Top rated

Jienk RS485 120Ω Terminator DIN Rail Block — 2-Way RJ45 Breakout

RS485120Ω terminatorDIN rail

5.0 · 10 reviews

Compare this product

A DIN rail (35mm) mounting board that turns an RJ45 8P8C connector into 9 screw terminals, with a built-in 120Ω resistor that can be switched in or out of the circuit via a jumper/selector on the board itself — made for Ethernet/DMX512/RS485/RS422/RS232. It's not a power cable: it's rated for 0.5A/100V, signal level, not load level. Verified live: ASIN B0BBQHMGJG, $19.99, 5.0 stars with 10 reviews (its own acrCustomerReviewLink block tied to the correct ASIN, no cross-contamination — a 2/1/4/7/86-star histogram that appeared in the same HTML was discarded because it belonged to a completely different ad product, ASIN B0CY3DFWX2).

$19.99reference price

#45

Migro PLC Ai Kit — Mini Programmable Logic Controller 20 I/O, with Software and Ladder Logic Course Included

PLCLadder LogicDIN Rail

4.7 · 4 reviews

Compare this product

A PLC (programmable logic controller) compatible with the FX family, in a 20-I/O board format: 12 DC digital inputs and 8 N/O relay outputs rated 6A. It's programmed with ladder logic or function-block diagrams from a Windows 10 32-bit PC over the included USB cable — the programming software and a ladder-logic training course (from basics to industrial applications) are included at no extra cost. It ships with its own DIN rail power supply (120/240VAC input, 24V DC output) and the DIN rail itself, so it doesn't depend on any other piece in this catalog to get running. Important: it has no RS485/Modbus port — it's a standalone PLC you program once and let run on its own inputs/outputs, not a node that joins this catalog's Modbus RTU relay bus. Verified live: ASIN B01M9GKS74, $149.97, brand Migro (confirmed in bylineInfo), real "Only 10 left in stock"/"Add to Cart", 4.7 stars with 4 reviews (its own averageCustomerReviews_feature_div block tied to the exact product title, no cross-contamination from other carousel items).

$149.97reference price