AUTOMATIZA_LAB
See ranking
#8 in Industrial Control (B2B)
REFLYING Open Cable Raceway 8 Sections (White)
Industrial Control (B2B)

REFLYING Open Cable Raceway 8 Sections (White)

4.6(356 reviews)

$22.99reference price

View on Amazon

Best for

Tidying wiring inside an electronics enclosure at low cost — doesn't replace a rigid duct if you need something structural or for outdoor use.

  • Cable raceway
  • 8 sections

What is it and what's it for?

It's a small plastic duct that sticks or screws onto a surface to hide and organize loose cables, like the kind you'd use to tidy cables behind a desk, but used here inside an electrical enclosure instead.

Real-world use cases

At home

You tidy the cables of your home automation project inside a box, keeping them from ending up loose and tangled.

In a business or workshop

A technician tidies the wiring inside a low-cost electronics enclosure, without needing a certified industrial duct.

How to avoid buying the wrong one

  • It's not a certified duct for a heavy industrial panel — it's thin plastic originally meant for desk cables.
  • It doesn't replace a rigid slotted duct if you need something structural or weatherproof.
  • It installs with double-sided tape or screws — make sure the surface you're sticking it to is clean and dry so the tape holds well.

The investment takeaway

For tidying light wiring inside an enclosure on a budget, it does the job well — but if your panel will be exposed to a lot of heat, weight, or outdoor conditions, it's worth investing in a more durable industrial slotted duct instead of risking this one breaking.

REFLYING Open Cable Raceway 8 Sections (White)

$22.99reference price

See current price on Amazon

More products in this category

#1Waveshare RS232/485/422 to Ethernet Gateway (PoE)

Waveshare RS232/485/422 to Ethernet Gateway (PoE)

RS485/ModbusPoEDIN rail
4.2 · 120 reviews

Supports all three serial standards (RS232/485/422) on one device, so it works for both old instruments with an RS232 port and multi-device RS485 buses. PoE power is a real plus in installations where there's no outlet near the panel — a single Ethernet cable carries both data and power. Confirm whether your Modbus master needs TCP Server or Client mode before buying; the mode is set in software, it doesn't come fixed from the factory.

$36.99reference price

See current price on AmazonSee full buying guide
#2MOLLOM VFD 1.5kW (2HP) — Single-Phase to Three-Phase 220V

MOLLOM VFD 1.5kW (2HP) — Single-Phase to Three-Phase 220V

220V 1P→3P2HPCNC
4.1 · 31 reviews

Single-phase input to 220V three-phase output — the typical choice for workshops without a three-phase feed that want to run a 3-phase motor. This is an entry-level model (2HP/1.5kW), meant for spindles and small CNC motors, not large industrial loads. The output range up to 3000Hz is only useful if your specific spindle takes advantage of it — for a standard 60Hz motor it's irrelevant.

$89.99reference price

Check it out on AmazonSee full buying guide
#3VFD 4kW (5HP) Vector Control — 220V 1-Phase/3-Phase

VFD 4kW (5HP) Vector Control — 220V 1-Phase/3-Phase

Vector control5HP1P/3P
4.3 · 24 reviews

Has vector control (not just scalar V/F), which holds torque better at low RPM — important if you'll be threading or cutting at reduced speed. At 5HP/4kW it covers larger motors than the entry-level model, and accepts both single-phase and three-phase input, giving flexibility depending on the electrical setup available. Rated up to 26A — confirm your wiring and breakers can handle that current before installing.

$174.99reference price

Check availability on AmazonSee full buying guide
See the full ranking of Industrial Control (B2B) →