AUTOMATIZA_LAB
See ranking
#3 in Industrial Control (B2B)
VFD 4kW (5HP) Vector Control — 220V 1-Phase/3-Phase
Industrial Control (B2B)

VFD 4kW (5HP) Vector Control — 220V 1-Phase/3-Phase

4.3(24 reviews)

$174.99reference price

View on Amazon

Best for

Larger motors (up to 5HP) that need to hold torque at low RPM, for example threading or cutting at reduced speed.

  • Vector control
  • 5HP
  • 1P/3P

What is it and what's it for?

It's a VFD like the one above, but with "vector control": a more precise way of driving the motor that keeps its force (torque) even when spinning slowly, like a car with a smart automatic transmission that doesn't lose traction climbing a hill at low speed.

Real-world use cases

At home

A hobbyist with a home wood lathe who needs to cut large pieces at low speed without the motor losing power.

In a business or workshop

A machine shop that needs to thread or cut metal at reduced speed without the motor stalling — vector control maintains the necessary force at that critical moment.

How to avoid buying the wrong one

  • Covers larger motors (up to 5HP) than the entry-level model in this ranking — confirm your motor's power before choosing one or the other.
  • Accepts single-phase or three-phase input, giving you flexibility depending on the electrical setup you have.
  • Rated up to 26A of current — confirm your wiring and breakers can handle that amperage before installing it.

The investment takeaway

If your work includes cutting or threading at reduced speed, vector control keeps you from losing pieces to torque loss — a real advantage over a cheaper scalar VFD that can't sustain force at low RPM.

VFD 4kW (5HP) Vector Control — 220V 1-Phase/3-Phase

$174.99reference price

See current price on Amazon

More products in this category

#1Waveshare RS232/485/422 to Ethernet Gateway (PoE)

Waveshare RS232/485/422 to Ethernet Gateway (PoE)

RS485/ModbusPoEDIN rail
4.2 · 120 reviews

Supports all three serial standards (RS232/485/422) on one device, so it works for both old instruments with an RS232 port and multi-device RS485 buses. PoE power is a real plus in installations where there's no outlet near the panel — a single Ethernet cable carries both data and power. Confirm whether your Modbus master needs TCP Server or Client mode before buying; the mode is set in software, it doesn't come fixed from the factory.

$36.99reference price

See current price on AmazonSee full buying guide
#2MOLLOM VFD 1.5kW (2HP) — Single-Phase to Three-Phase 220V

MOLLOM VFD 1.5kW (2HP) — Single-Phase to Three-Phase 220V

220V 1P→3P2HPCNC
4.1 · 31 reviews

Single-phase input to 220V three-phase output — the typical choice for workshops without a three-phase feed that want to run a 3-phase motor. This is an entry-level model (2HP/1.5kW), meant for spindles and small CNC motors, not large industrial loads. The output range up to 3000Hz is only useful if your specific spindle takes advantage of it — for a standard 60Hz motor it's irrelevant.

$89.99reference price

Check it out on AmazonSee full buying guide
#4Waveshare Industrial USB to RS485 Converter (2 units)

Waveshare Industrial USB to RS485 Converter (2 units)

USBFT232RL2 units
4.6 · 77 reviews

Unlike the RS232/485/422-to-Ethernet gateway already in this ranking, this is a simple USB-to-RS485 converter — it plugs directly into a PC/laptop's USB port to configure, program, or monitor an RS485 bus from a computer, not to bridge to an Ethernet network. Uses the FT232RL chipset (a recognized one, not a generic clone) plus an SP485EEN transceiver, with real overvoltage (TVS) and ESD protection — something cheaper options of this type often skip. Comes as 2 units, useful if you need one for the shop and one as a spare.

$25.99reference price

See current price on AmazonSee full buying guide
See the full ranking of Industrial Control (B2B) →